After I cut it out I just kept avoiding it, since I know I have to do something with the sequins in the seam allowances and that seemed like a big job. Anyway Jenni (YorkshireLass of SewYLD) suggested I snip each sequin twice without cutting the embroidery thread and remove the pieces. So today I started to do just that. It was hard going, very tedious, but I am more than halfway done.
I used a tape measure which is 1.5cm (5/8ths inch) wide and laid it on the edge of the fabric pieces right side up. Any sequins partially or wholly covered by the tape then got removed. I still have to do the outer waistband pieces, and several edges of the front skirt. And depending on where I hem the skirt I may have to take some more off the lower skirt pieces.
Other than this skirt the only other planned piece for the Christmas Collection was the gold wrap blouse. I previously made a child's party dress from this fabric, so will have to confirm there is enough fabric left to actually cut out the blouse. If I get fed up of sequins that might be what I do next.
Updated to add - I cut the sequins with scissors - they need to be sharp and fairly pointed and not shears or embroidery scissors but some sort of craft ones as if you do this a lot I am sure it will dull the blades. This works OK becuase the sequins are some sort of foil plastic not metal and so can be cut OK with scissors.
I cut each one on the opposite sides and then used a blunt seam ripper to pull the cut sections out from the embroidery thread. This worked really well.
